Enable Hik-Connect Service Via Sadp Software; Access Camera Via Hik-Connect; Set Isup - HIKVISION DS-2TD2636-15 User Manual

Thermal & Optical Bi-spectrum Network Camera User Manual
11.8.2 Enable
Hik-Connect
This part introduce how to enable Hik-Connect service via SADP software of an activated camera.
Steps
1. Run SADP software.
2. Select a camera and enter Modify Network Parameters page.
3. Check Enable Hik-Connect.
4. Create a verification code or change the old verification code.
Note
The verification code is required when you add the camera to Hik-Connect service.
5. Click and read "Terms of Service" and "Privacy Policy".
6. Confirm the settings.
11.8.3 Access Camera via
Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive
alarm notification and so on.
Steps
1. Download and install the Hik-Connect app by searching "Hik-Connect" in App Store or Google
(TM)
Play
2. Launch the app and register for a Hik-Connect user account.
3. Log in after registration.
4. In the app, tap "+" on the upper-right corner and then scan the QR code of the camera to add
the camera. You can find the QR code on the camera or on the cover of the Quick Start Guide of
the camera in the package.
5. Follow the prompts to set the network connection and add the camera to your Hik-Connect
account.
For detailed information, refer to the user manual of the Hik-Connect app.

11.9 Set ISUP

When the device is registered on ISUP platform (formerly called Ehome), you can visit and manage
the device, transmit data, and forward alarm information over public network.
Steps
1. Go to Configuration → Network → Advanced Settings → Platform Access.
2. Select ISUP as the platform access mode.
3. Select Enable.
Service via SADP Software
Hik-Connect
62