Set Isup; Access Camera Via Hik-Connect - HIKVISION DS-2XC6745G0-IZHS User Manual

Note
The port of the network camera cannot conflict with other ports. For example, some web
management port of the router is 80. Change the camera port if it is the same as the management
port.

8.14 Set ISUP

When the device is registered on ISUP platform (formerly called Ehome), you can visit and manage
the device, transmit data, and forward alarm information over public network.
Steps
1. Go to Configuration → Network → Platform Access → ISUP .
2. Optional: Select an access center.
3. Check Enable.
4. Select a protocol version and enter related parameters.
5. Click Save.
Register status turns to Online when the function is correctly set.

8.15 Access Camera via Hik-Connect

Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive
alarm notification and so on.
Before You Start
Connect the camera to network with network cables.
Steps
1. Get and install Hik-Connect application by the following ways.
- Visit https://appstore.hikvision.com to download the application according to your mobile
phone system.
- Visit the official site of our company. Then go to Support → Tools → Hikvision App Store .
- Scan the QR code below to download the application.
Note
If errors like "Unknown app" occur during the installation, solve the problem in two ways.
Network Camera User Manual
57