Related Manuals for HIKVISION DS-2TD2136-10
Summarization of Contents
Regulatory Information
FCC Information
Details FCC rules and limits for equipment operation in commercial environments.
FCC Conditions
Outlines the two conditions under which the device complies with FCC Rules.
EU Conformity Statement
States product compliance with applicable harmonized European standards and directives.
Industry Canada ICES-003 Compliance
Confirms the device meets Industry Canada ICES-003 standards.
Appearance Description
Type I Camera Appearance
Provides an overview of the Type I thermal network bullet camera and its components.
Type II Camera Appearance
Presents an overview of the Type II thermal network bullet camera.
Cable Description
Details the various cables used with the bullet camera, including power, video, and network interfaces.
Installation
Memory Card Installation (Type I)
Instructions for installing a memory card into the Type I camera.
Memory Card Installation (Type II)
Instructions for installing a memory card into the Type II camera.
Wide Range Coverage
Table detailing detection and recognition ranges for various lens focal lengths and targets.
Installing Camera (Type I)
Provides instructions for mounting the Type I camera using wall, ceiling, or stand methods.
Installing Camera (Type II)
Provides instructions for mounting the Type II camera using wall, ceiling, or stand methods.
Installation of Network Cable Water-proof Jacket
Details the process of attaching a water-proof accessory to the network cable for outdoor installation.
Setting the Network Camera over the LAN
Wiring
Illustrates direct and switch/router connection methods for the network camera.
Activation via Web Browser
Step-by-step guide for activating the camera using a web browser interface.
Activation via SADP Software
Instructions for activating the camera using the SADP software for device detection and activation.
Modifying the IP Address
Explains how to change the camera's IP address using SADP software to match the PC's subnet.
Frequently Asked Questions (FAQ)
Device Running Error
Troubleshooting steps for issues where the device fails to start up or reboots repeatedly.
Device Upgrading
Troubleshooting steps for issues where the device fails to upgrade, related to network or program mismatch.
Others
Troubleshooting for vague live view, often due to protective film or lens dirt.
Live view fails with good network connection
Troubleshooting for live view failures despite a good network connection, involving plug-ins and port settings.
Focus fails when you test outdoor device in indoor situation
Troubleshooting for focus issues, suggesting default settings or adjusting minimum focusing distance.
Need help?
Do you have a question about the DS-2TD2136-10 and is the answer not in the manual?
Questions and answers