Nec 2 Of 5 On/Off; Check Digit; Nec 2 Of 5 Message Length - Honeywell HH490 User Manual

NEC 2 of 5 On/Off

Check Digit

No Check Digit indicates that the scanner reads and transmits barcode data
with or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads NEC
2 of 5 barcodes printed with a check digit, but will not transmit the check digit
with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads NEC 2
of 5 barcodes printed with a check digit, and will transmit this digit at the end of
the scanned data.

NEC 2 of 5 Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
90
On
Default
* No Check Digit
Validate and Transmit
(page 82) for additional information. Minimum and
Minimum Message Length
.
= No Check Digit
* Off
Validate, but Don't Transmit
Message
HH490 User Guide