MSI On/Off
MSI Check Character
Different types of check characters are used with MSI barcodes. You can program
the scanner to read MSI barcodes with Type 10 check characters.
Validate Type 10, but Don't Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner
will only read MSI barcodes printed with the specified type check character(s),
and will transmit the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don't Transmit, the
unit will only read MSI barcodes printed with the specified type check
character(s), but will not transmit the check character(s) with the scanned data.
Validate 2 Type 10 Characters,
Validate Type 11 then Type 10
Character, but Don't Transmit
118
On
* Validate Type 10, but Don't
Transmit
but Don't Transmit
* Off
Default
=
Validate Type 10 and Transmit
Validate 2 Type 10 Characters
and Transmit
HH490 User Guide