Gs1 Composite Code Message Length; Gs1 Emulation - Honeywell HH490 User Manual

Note: If you scan coupons that have both UPC and GS1 Databar codes, you may wish to
scan and output only the data from the GS1 Databar code. See
DataBar Output

GS1 Composite Code Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-2435. Minimum Default = 1, Maximum Default = 2435.

GS1 Emulation

The scanner can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar
symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14,
GS1- 128, and GS1 DataBar and GS1 Composites. (Any application that accepts
GS1 data can be simplified since it only needs to recognize one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13)
are expanded out to 16 digits. If the AIM ID is enabled, the value will be the GS1-
128 AIM ID, ]C1 (see
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will be
the GS1-DataBar AIM ID, ]e
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and
UPC- E expansion is controlled by the
AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
Charts
If EAN8 to EAN13 Conversion is scanned, all EAN8 barcodes are converted to
EAN13 format.
Default
126
(page 104) for further information.
(page 82) for additional information. Minimum and
Minimum Message Length
Symbology Charts
on page 200).
GS1 Emulation Off
=
on page 200).
m
(see Symbology Charts
UPC-E0 Expand
.
Coupon GS1
Message
Maximum Message Length
on page 200).
(page 118) setting. If the
Symbology
HH490 User Guide