Data Matrix Message Length; Data Matrix Code Page - Honeywell HH490 User Manual

Data Matrix Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.

Data Matrix Code Page

Data Matrix Code pages define the mapping of character codes to characters. If
the data received does not display with the proper characters, it may be because
the barcode being scanned was created using a code page that is different from
the one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
646 Character Replacements
barcode from the Programming Chart, beginning on page 211. The data
characters should then appear properly.
HH490 User Guide
Dotpeen DPM Decoding
Reflective (Etched) DPM
Decoding
(page 82) for additional information. Minimum and
Minimum Message Length
on page 208), and scan the value and the Save
Data Matrix Code Page
* Disable DPM Decoding
Message
Maximum Message Length
ISO 2022/ISO
133