Codabar Start/Stop Characters; Codabar Check Character - Honeywell HH490 User Manual

Codabar Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.
Transmit

Codabar Check Character

Codabar check characters are created using different "modulos." You can
program the scanner to read only Codabar barcodes with Modulo 16 check
characters.
No Check Character indicates that the scanner reads and transmits barcode
data with or without a check character.
When Check Character is set to Validate and Transmit, the scanner will only read
Codabar barcodes printed with a check character and will transmit this character
at the end of the scanned data.
When Check Character is set to Validate, but Don't Transmit, the unit will only
read Codabar barcodes printed
check character with the scanned data.
HH490 User Guide
.
Transmit
Default No Check Character.
=
* No Check Character
with
a check character but will not transmit the
Off
Default Don't
=
* Don't Transmit
Validate Modulo 16, but Don't
Transmit
83