Primary/Alternate Data Formats; Single Scan Data Format Change - Honeywell HH490 User Manual

Area-imaging scanner
Hide thumbs Also See for HH490:
Table of Contents

Advertisement

Primary/Alternate Data Formats

You can save up to four data formats, and switch between these formats. Your
primary data format is saved under 0. Your other three formats are saved under 1,
2, and 3. To set your device to use one of these formats, scan one of the barcodes
below.

Single Scan Data Format Change

You can also switch between data formats for a single scan. The next barcode is
scanned using an alternate data format, then reverts to the format you have
selected above (either Primary, 1, 2, or 3).
For example, you may have set your device to the data format you saved as Data
Format 3. You can switch to Data Format 1 for a single trigger pull by scanning
the Single Scan-Data Format 1 barcode below. The next barcode that is
scanned uses Data Format 1, then reverts back to Data Format 3.
HH490 User Guide
Primary Data Format
Data Format 2
Single Scan-Primary Data
Format
Data Format 1
Data Format 3
Single Scan-Data Format 1
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents