About Disinfectant-Ready Models; Inspect Cords And Connectors; Replace Cables In Corded Scanners - Honeywell HH490 User Manual

About Disinfectant-ready Models

Some configurations of HH490 scanners are available with an external plastic
housing that is designed to resist the effects of harsh chemicals. These scanners
are equipped with disinfectant-ready housings (DRH) for the healthcare and
general-purpose markets.
Please refer to the Honeywell Safety and Productivity Solutions website for
specific details on how to clean HH490 scanners with disinfectant-ready
housings.
Helpful information on the care of these specialty products can be found in the
following articles:
•
•

Inspect Cords and Connectors

Inspect the interface cable and connector for wear or other signs of damage. A
badly worn cable or damaged connector may interfere with scanner operation.
Contact your distributor for information about cable replacement. Cable
replacement instructions are on

Replace Cables in Corded Scanners

The standard interface cable is attached to the scanner with an 10-pin modular
connector. When properly seated, the connector is held in the scanner's handle
by a flexible retention tab. The interface cable is designed to be field replaceable.
•
•
198
Learn to Clean Honeywell Healthcare Disinfectant-Ready Products
Honeywell Instructions for Cleaning General Purpose Disinfectant-Ready
Housing Devices
Order replacement cables from Honeywell or from an authorized distributor.
When ordering a replacement cable, specify the cable part number of the
original interface cable.
page 198.
HH490 User Guide