Centering; Single Code Centering; Custom Centering - Honeywell HH490 User Manual

Centering

Use Centering to narrow the scanner's field of view to make sure that when the
scanner is hand-held, it reads only those barcodes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read. (Centering can be used in conjunction with
Delay, page 47, for the most error-free operation in applications where multiple
codes are spaced closely together. Using the Aimer Delay and Centering features,
the scanner can emulate the operation of older systems, such as linear laser
barcode scanners.)
Note: To adjust centering when the scanner is in a stand, see
(page

Single Code Centering

Scan Single Code Centering to target the barcode closest to the center of the
image. Singling out a barcode in this manner increases scanning accuracy when
there are multiple barcodes close together.

Custom Centering

Use the following settings to customize your centering window. If a barcode is not
touched by a predefined window, it will not be decoded or output by the scanner.
If centering is turned on by scanning Centering On, the scanner only reads codes
that pass through the centering window you specify using the Top of Centering
Window, Bottom of Centering Window, Left, and Right of Centering Window
barcodes.
Example: In the example below, the white box is the centering window. The centering
window has been set to 20% left, 30% right, 8% top, and 25% bottom. Since
Barcode 1 passes through the centering window, it will be read. Barcode 2 does
not pass through the centering window, so it will not be read.
38
).
38
Single Code Centering
Presentation Centering
HH490 User Guide
Aimer