Chapter 8 - Utilities; Add A Test Code I.d. Prefix To All Symbologies; Show Software Revision; Test Menu - Honeywell HH490 User Manual

CHAPTER
8
CHAPTER 8 -

Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the
single character code that identifies each symbology.) This action first clears all
current prefixes, then programs a Code I.D. prefix for all symbologies. This is a
temporary setting that will be removed when the unit is power cycled.

Show Software Revision

Scan the barcode below to output the current software revision, unit serial
number, and other product information for both the scanner.
Show Boot Software Revision

Test Menu

When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
HH490 User Guide
UTILITIES
Add Code I.D. Prefix to All Symbologies (Temporary)
Symbology Charts, beginning on page 200 for the
Show App Software Revision
159