Honeywell HH490 User Manual page 78

F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
1234567890
ABCDEFGHIJ
<CR>
Send all characters up to a particular character
F3 Include in the output message all characters from the input message, starting
with the character at the current cursor position and continuing to, but not
including, the search character "ss," followed by an insert character. The cursor is
moved forward to the "ss" character.
search character's hex value for its ASCII code, and xx stands for the insert
character's hex value for its ASCII code.
Refer to the
for decimal, hex and character codes.
F3 Example: Send all characters up to a particular character
Using the barcode above, send all characters up to but not including "D," followed
by a carriage return.
Command string: F3440D
F3 is the "Send all characters up to a particular character" command
44 is the hex value for a 'D"
0D is the hex value for a CR
The data is output as:
1234567890ABC
<CR>
Send all characters up to a string
B9 Include in the output message all characters from the input message, starting
with the character at the current cursor position and continuing to, but not
including, the search string "s...s." The cursor is moved forward to the beginning
of the "s...s" string.
string, and s...s stands for the string to be matched. The string is made up of hex
values for the characters in the string. Refer to the
64
ASCII Conversion Chart (Code Page 1252),
Syntax = B9nnnns...s
Syntax = F3ssxx
where ss stands for the
beginning on page 203
where nnnn stands for the length of the
ASCII Conversion Chart (Code
HH490 User Guide