Check Digit; Interleaved 2 Of 5 Message Length; Nec 2 Of 5 - Honeywell HH490 User Manual

Check Digit

No Check Digit indicates that the scanner reads and transmits barcode data
with or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads
Interleaved 2 of 5 barcodes printed with a check digit, but will not transmit the
check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads
Interleaved 2 of 5 barcodes printed with a check digit, and will transmit this digit
at the end of the scanned data.

Interleaved 2 of 5 Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 2-80. Minimum Default = 6, Maximum Default = 80.

NEC 2 of 5

HH490 User Guide
* No Check Digit
Validate and Transmit
(page 82) for additional information. Minimum and
Minimum Message Length
Default No Check Digit.
=
< Default All NEC 2 of 5 Settings >
Validate, but Don't Transmit
Message
Maximum Message Length
89