Code 39 Message Length; Code 39 Append - Honeywell HH490 User Manual

When Check Character is set to Validate and Transmit, the scanner only reads
Code 39 barcodes printed with a check character and will transmit this character
at the end of the scanned data.

Code 39 Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48.

Code 39 Append

This function allows the scanner to append the data from several Code 39
barcodes together before transmitting them to the host computer. When the
scanner encounters a Code 39 barcode with the append trigger character(s), it
buffers Code 39 barcodes until it reads a Code 39 barcode that does not have the
append trigger. The data is then transmitted in the order in which the barcodes
were read (FIFO).
86
* No Check Character
Validate and Transmit
(page 82) for additional information. Minimum and
Minimum Message Length
Default
On
Default No Check Character.
=
Off.
=
Validate, but Don't Transmit
Message
Maximum Message Length
* Off
HH490 User Guide