Code 93 Code Page; Straight 2 Of 5 Industrial (Three-Bar Start/Stop); Straight 2 Of 5 Industrial On/Off - Honeywell HH490 User Manual

deleting the first space from each. The scanner transmits the appended data
when it reads a Code 93 barcode that starts with a character other than a space.
Default = Off.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
646 Character Replacements
barcode from the
characters should then appear properly.

Straight 2 of 5 Industrial (three-bar start/stop)

Straight 2 of 5 Industrial On/Off

92
On
on page 208), and scan the value and the Save
Programming Chart,
<Default All Straight 2 of 5 Industrial Settings>
*On
beginning on page 211. The data
Code 93 Code Page
* Off
ISO 2022/ISO
Off
HH490 User Guide