Upc-E0 Leading Zero; Upc-E0 Addenda; Upc-E1 - Honeywell HH490 User Manual

UPC-E0 Leading Zero

This feature allows the transmission of a leading zero (0) at the beginning of
scanned data. To prevent transmission, scan Off.

UPC-E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Off for both 2 Digit and 5 Digit Addenda.

UPC-E1

Most U.P.C. barcodes lead with the 0 number system. For these codes, use
UPC-E0
system, use the UPC-E1 On selection.
HH490 User Guide
* On
2 Digit Addenda On
5 Digit Addenda On
(page 103). If you need to read codes that lead with the 1 number
UPC-E1 On
Default
=
Default Off.
=
On.
Off
Default
=
* 2 Digit Addenda Off
* 5 Digit Addenda Off
107