Nec 2 Of 5 - Honeywell Granit XP 199 i Series User Manual

NEC 2 of 5

NEC 2 of 5 On/Off
Check Digit
No Check Digit indicates that the scanner reads and transmits barcode data with
or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads NEC 2
of 5 barcodes printed with a check digit, but will not transmit the check digit with
the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads NEC 2 of
5 barcodes printed with a check digit, and will transmit this digit at the end of the
scanned data. Default = No Check Digit.
150
* On
* No Check Digit
Validate and Transmit
< Default All NEC 2 of 5 Settings >
Off
Validate, but Don't Transmit
Granit XP User Guide