Table of Contents
Advertisement
Interleaved 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
mum and Maximum lengths = 1-80. Minimum Default = 6, Maximum
Default = 80.
Minimum Message Length
NEC 2 of 5
NEC 2 of 5 On/Off
Check Digit
No Check Digit indicates that the engine reads and transmits bar
code data with or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only
reads NEC 2 of 5 bar codes printed with a check digit, but will not
transmit the check digit with the scanned data.
6-12
(page 6-2) for additional information. Mini-
< Default All NEC 2 of 5 Settings >
On
Maximum Message Length
* Off
Advertisement
Table of Contents
