Qr Code On/Off; Qr Code Message Length; Qr Code Append - Honeywell HH490 User Manual

QR Code On/Off

This selection applies to both QR Code and Micro QR Code.

QR Code Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-7089. Minimum Default = 1, Maximum Default = 7089.

QR Code Append

This function allows the scanner to append the data from several QR Code
barcodes together before transmitting them to the host computer. When the
scanner encounters an QR Code barcode with the append trigger character(s), it
buffers the number of QR Code barcodes determined by information encoded in
those barcodes. Once the proper number of codes is reached, the data is output
in the order specified in the barcodes. There are 3 ways to scan appended QR
Code:
One Scan: Pull the trigger one time and all appended QR Codes in the same
image are decoded.
Swipe: Pull and hold down the trigger and scan all appended QR Codes while
keeping the trigger pressed. The scanner emits short beeps for each partial QR
Code that is scanned and buffered. One long beep is emitted after the last QR
Code is scanned and the data is complete. Not compatible with Presentation
mode.
128
* On
(page 82) for additional information. Minimum and
Minimum Message Length
Off
Message
Maximum Message Length
HH490 User Guide