Interfunction Delay; Intermessage Delay - Honeywell HH490 User Manual

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay barcode below, then scan the number of 5ms
delays, and the Save barcode from the
211.
To remove this delay, scan the Interfunction Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the
page 211.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart,
To remove this delay, scan the Intermessage Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the
page 211.
58
Prefix Scanned Data
STX 1 HT 2 3 4 5
Interfunction Delays
Interfunction Delay
beginning on page 211.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Programming Chart,
Suffix
CR LF
Programming Chart,
2nd Scan Transmission
Programming Chart,
beginning on page
beginning on
beginning on
HH490 User Guide