Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
646 Character Replacements
barcode from the
characters should then appear properly.
Chinese Sensible (Han Xin) Code
Han Xin Code On/Off
Han Xin Code Message Length
Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-7833. Minimum Default = 1, Maximum Default = 7833.
136
Programming Chart,
On
(page 82) for additional information. Minimum and
Minimum Message Length
on page 208), and scan the value and the Save
beginning on page 211. The data
Aztec Code Page
< Default All Han Xin Settings >
ISO 2022/ISO
* Off
Message
HH490 User Guide