Upc-A On/Off; Upc-A Check Digit; Upc-A Number System - Honeywell HH490 User Manual

UPC-A On/Off

Note: To convert UPC-A barcodes to EAN-13, see
108.

UPC-A Check Digit

This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not.

UPC-A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data but can be programmed so it is not transmitted
(Off).
HH490 User Guide
* On
* On
Default On.
=
* On
Convert UPC-A to EAN-13
Default On
= .
Off
on page
Off
Off
101