Download  Print this page

Honeywell MS7120 Orbit Manual

Hide thumbs

Advertisement

QUESTIONS?
Ask the experts at POSMicro.com.
1.800.241.6264
Live Chat Now
support@POSMicro.com
Monday - Friday 6 AM to 5 PM Pacific Time
1.800.241.6264
Honeywell MS7120
Orbit Manual
More information available at
BULk DISCOUNTS
FREE SHIPPING*
*Free ground shipping to the continental USa on orders over $100.
For Help Call
POSMicro.com
SE HaBLa
ESpañOL

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell MS7120 Orbit

  Summary of Contents for Honeywell MS7120 Orbit

  • Page 1 For Help Call 1.800.241.6264 Honeywell MS7120 Orbit Manual More information available at POSMicro.com QUESTIONS? BULk DISCOUNTS SE HaBLa Ask the experts at POSMicro.com. ESpañOL FREE SHIPPING* 1.800.241.6264 Live Chat Now support@POSMicro.com Monday - Friday 6 AM to 5 PM Pacific Time...
  • Page 2 METROLOGIC INSTRUMENTS, INC. ® MS7120 Orbit Presentation Laser Scanner Installation and User’s Guide...
  • Page 4 OCATIONS ORPORATE EADQUARTERS North America Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO 90 Coles Road Tel: 856-228-8100 Blackwood, NJ 08012-4683 Fax: 856-228-6673 Email: info@metrologic.com Internet: www.metrologic.com UROPEAN EADQUARTERS Germany, Metrologic Instruments GmbH Tel: +49 89 89019 0 Middle East and Africa Dornierstrasse 2 Fax: +49 89 89019 200 82178 Puchheim b.
  • Page 5: Table Of Contents

    Operational Notes ..................3 Installation For RS232, OCIA and IBM 46XX Interfaces.........4 For Keyboard Wedge Interface .............5 For Stand Alone Keyboard Interface.............6 Notes for USB Interface ................7 Notes for MS7120-00 'Laser Emulation' ..........7 Scanner Parts....................8 Audible Indicators..................9 Visual Indicators ..................10 Failure Modes..................11 Labels......................12 Maintenance....................12...
  • Page 6: Introduction

    NTRODUCTION ® Orbit is an aggressive, omnidirectional laser bar code scanner. Lightweight and rugged, Orbit is small in size, but BIG in performance. Designed for applications where counter space is limited, Orbit is the ideal presentation scanner for retail, convenience, liquor and specialty stores.
  • Page 7: Scanner And Accessories

    MS7120 Orbit Presentation Laser Scanner ® 00-02407B MetroSelect Programming Guide 00-02408B MS7120 Installation and User’s Guide* Available on the Metrologic website - www.metrologic.com PTIONAL CCESSORIES Part # Description AC to DC Power Transformer- Regulated 5.2VDC @ 650 mA output. 45-45593...
  • Page 8: Operational Notes

    250 mA of current @ 5VDC. Orbit is shipped from the factory programmed with default settings. To configure the MS7120 scanner to meet the host system’s specific needs, refer to the MetroSelect Programming Guide (...
  • Page 9: For Rs232, Ocia And Ibm 46Xx Interfaces

    NTERFACES 1. Turn off the host system. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin jack on the MS7120. 3. Connect the 9 pin female end of the PowerLink cable to the host device.
  • Page 10: For Keyboard Wedge Interface

    NTERFACE 1. Turn off the PC/Host. 2. Connect the male 10-pin RJ45 end of the PowerLink cable to the jack on the MS7120. 3. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable.
  • Page 11: For Stand Alone Keyboard Interface

    1. Turn off the host system. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin jack on the MS7120. 3. Connect the PowerLink cable to the keyboard port on the host system. 4. Plug the power supply’s L-shaped plug into the power jack on the PowerLink cable.
  • Page 12: Notes For Usb Interface

    If you recall defaults while re-configuring your scanner the Laser Emulation Mode will no longer be enabled. Scan the following barcode to re-enable the Laser Emulation interface. The scanner you are using must be labeled as an MS7120-00 to support this feature. Enable Laser Emulation Mode...
  • Page 13: Scanner Parts

    CANNER ARTS Red LED On a successful read of a bar code, the red LED will turn ON. After communication to the host is complete, the red LED will turn OFF. Refer to Visual Indicators and Audible Indicators for additional information. Green LED During normal operation, the green LED is ON.
  • Page 14: Audible Indicators

    UDIBLE NDICATORS When the MS7120 scanner is in operation, it provides audible feedback. These sounds indicate the status of the scanner. Eight settings are available for the tone of the beep (normal, 6 alternate tones and no tone). ® To change the tone, refer to the MetroSelect...
  • Page 15: Visual Indicators

    ISUAL NDICATORS There is a red LED and a green LED on the head of the MS7120. When the scanner is on, the flashing or constant illumination of the LEDs indicates the status of the current scan and the scanner.
  • Page 16: Failure Modes

    AILURE ODES Flashing Green and One Razzberry Tone This indicates the scanner has experienced a laser subsystem failure. Return the unit for repair at an authorized service center. Flashing Red and Green and Two Razzberry Tones This indicates the scanner has experienced a motor failure.
  • Page 17: Labels

    ABELS Each scanner has three labels on the bottom of the unit. These labels contain information such as; the model number, date of manufacture, serial number, laser class and caution statements. The following illustrations show the location and content of the three labels. AINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code.
  • Page 18: Scan Volume Specifications

    OLUME PECIFICATIONS Specifications based on 100% UPC Bar Codes. Optimal Low Density (Default) 190mm 60mm 100mm Scan Area Optimal High Density 215mm 60mm 105mm Scan Area...
  • Page 19: Close

    OLUME PECIFICATIONS Specifications based on 100% UPC Bar Codes. Close 175mm 60mm 95mm Scan Area Normal 190mm 60mm 100mm Scan Area...
  • Page 20: Far

    OLUME PECIFICATIONS Specifications based on 100% UPC Bar Codes. 215mm 75mm 105mm 75mm Scan Area...
  • Page 21: Optimal Low Density (Default)

    EPTH OF IELD BY INIMUM LEMENT IDTH Optimal Low Density (Default) & Distance: Scanner Face & To Bar Code (mm) Width of Scan Field (mm) Minimum Bar Code Element Width mils...
  • Page 22: Optimal High Density

    EPTH OF IELD BY INIMUM LEMENT IDTH Optimal High Density & Distance: Scanner Face & To Bar Code (mm) Width of Scan Field (mm) Minimum Bar Code Element Width mils...
  • Page 23: Close

    EPTH OF IELD BY INIMUM LEMENT IDTH Close Distance: Scanner Face To Bar Code (mm) Width of Scan Field (mm) Minimum Bar Code Element Width mils...
  • Page 24: Normal

    EPTH OF IELD BY INIMUM LEMENT IDTH Normal Distance: & Scanner Face To Bar Code & (mm) Width of Scan Field (mm) Minimum Bar Code Element Width mils...
  • Page 25: Far

    EPTH OF IELD BY INIMUM LEMENT IDTH Distance: Scanner Face To Bar Code (mm) & Width of Scan Field (mm) Minimum Bar Code Element Width mils...
  • Page 26: Installing The Optional Wall/Counter Mount

    NSTALLING THE PTIONAL OUNTER OUNT Kit #45-45619 contains: Locking Plate 50-50302] Qty. 1 MLPN Base Cover 50-50301] Qty. 1 MLPN Wood Screw, #7 x 1.00” 18-18013] Qty. 3 MLPN Flathead Screw, M3 x 8 mm Fig. 1 18-18004] Qty. 4 MLPN Drill mounting holes Note the position Orbit will rest (fig.
  • Page 27: Troubleshooting Guide

    UIDE The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-METRO or 1-800-436-3876 to preserve the limited warranty terms on page 39. All Interfaces MS7120 Series Troubleshooting Guide SYMPTOMS POSSIBLE CAUSE(S) SOLUTION No LEDs, beep No power is being...
  • Page 28 ROUBLESHOOTING UIDE ONTINUED SYMPTOMS POSSIBLE CAUSE(S) SOLUTION The unit powers Beeper disabled. No Enable beeper. Select tone up, but does tone selected not scan and/or beep The unit powers Scanning a particular UPC/EAN, Code 39, interleaved up, but does symbology that is not 2 of 5, Code 93, Code 128 and not scan and/or enabled...
  • Page 29 ROUBLESHOOTING UIDE ONTINUED SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Scanner beeps The print quality of the Check print mode. The type of at some bar bar code is suspect printer could be the problem. codes and NOT Change print settings. For for others of the example change to econo mode same bar code or high speed...
  • Page 30 ROUBLESHOOTING UIDE ONTINUED Keyboard Wedge Only SYMPTOMS POSSIBLE CAUSE(S) SOLUTION The unit scans Configuration is not Make sure the scanner is the bar code correct configured for the appropriate but there is no mode. Check internal jumper data The unit scans Configuration is not Make sure that the proper PC but the data is...
  • Page 31 ROUBLESHOOTING UIDE CONTINUED RS-232 Only SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Power-up OK Com port at the host is Check to make sure that the and scans OK not working or baud rate and parity of the but does not configured properly scanner and the communication communicate port match and the program is...
  • Page 32: Rs-232 Demonstration Program

    RS-232 D EMONSTRATION ROGRAM If an RS-232 scanner is not communicating with your IBM compatible PC, key in the following BASIC program to test that the communication port and scanner are working. This program is for demonstration purposes only. It is only intended to prove that cabling is correct, the com port is working, and the scanner is working.
  • Page 33: Applications And Protocols

    Full RS-232C 7120 (OCIA Configurable) The MS7120 Hand-Held Laser Scanner with Built-in PC Keyboard Wedge Interface is designed to be used for keyboard emulation only. Many RS-232 programmable functions available in other Metrologic scanners are also available as keyboard wedge functions.
  • Page 34: Design Specifications

    ESIGN PECIFICATIONS MS7120 S PECIFICATIONS PERATIONAL Light Source: VLD 640-660 nm Depth of Field: 0 mm to 190 mm (0" to 7.5") at default (programmable) Scan Speed: 1200 scans/second Scan Pattern: 5 fields of 4 parallel lines (omnidirectional) Scan Lines: Min Bar Width: 0.13 mm (5.2 mil)
  • Page 35 ESIGN PECIFICATIONS MS7120 S PECIFICATIONS LECTRICAL Input Voltage: 5.2VDC ± 0.25V Power: 1.1 W Operating Current: 220 mA (270 IBM) DC Transformers: Class II; 5.2VDC@ 650 mA Laser Class: CDRH: Class IIa; EN 60825-1:1994/A11:1996 Class 1 EMC: FCC, ICES-003 & EN 55022 Class B NVIRONMENTAL 0°C to 40°C...
  • Page 36: Default Settings

    EFAULT ETTINGS Many functions of the scanner can be "programmed" - that is, enabled or disabled. The scanner is shipped from the factory programmed to a set of default conditions. The default parameter of the scanner has an asterisk ( * ) in the charts on the following pages. If an asterisk is not in the default column then the default setting is Off or Disabled.
  • Page 37 EFAULT ETTINGS Light Laser Parameter Default OCIA RS-232* 46XX Emulation ü DTS/NIXDORF ü NCR F ü NCR S ü Poll Light Pen Source ü ü ü ü ü ü Beeper Tone Normal ü ü ü ü ü ü Before Beep/Transmit Sequence Transmit ü...
  • Page 38 EFAULT ETTINGS Light Laser Parameter Default OCIA RS-232* 46XX Emulation ü ü ü ü Convert EAN-8 to EAN-13 ü ü ü ü ü ü Transmit UPC-A Number System ü ü ü ü ü ü Transmit UPC-A Manufacturer ID# ü ü ü...
  • Page 39 EFAULT ETTINGS Light Laser Parameter Default OCIA RS-232* 46XX Emulation ü ü Carriage Return ü ü Line Feed - disabled by default in KBW ü ü Tab Prefix ü ü Tab Suffix ü "DE" Disable Command ü "FL" Laser Enable Command ü...
  • Page 40 EFAULT ETTINGS Light Laser Parameter Default OCIA RS-232* 46XX Emulation ü ü ü ü as code Coupon Code 128 code ü ü ü ü ü ü Programmable Code 7 avail. Lengths ü Programmable Prefix Characters avail. ü Suffix Characters Prefixes for individual Code Types ü...
  • Page 41: Scanner And Cable Terminations

    CANNER AND ABLE ERMINATIONS Scanner Pinout Connections The MS7120 scanner interfaces terminate to a 10-pin modular jack. The serial # label indicates the interface enabled when the scanner is shipped from the factory. Some units have internal jumpers that can be moved to enable a different electrical interface.
  • Page 42 CANNER AND ABLE ERMINATIONS MS7120-11 IBM 46XX/RS-232 Function Ground RS-232 Transmit Output RS-232 Receive Input RTS Output CTS Input DTR Input IBM 46XX transmit IBM 46XX Receive +5VDC Shield Ground Options listed are program/cable selections Cable Connector configurations PowerLink Cable...
  • Page 43 CANNER AND ABLE ERMINATIONS Cable Connector Configuration The PowerLink cable is terminated with a 5-pin DIN female connector on one end, and a 6-pin mini DIN male on the other. PowerLink Cable 5-Pin DIN, Female 6-Pin DIN, Male Metrologic will supply an adapter cable with a 5-pin DIN male connector on one end and a 6-pin mini DIN female connector on the other.
  • Page 44: Limited Warranty

    The MS7120 Orbit scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility. The MS7120 scanners have a two (2) year limited warranty from the date of manufacture. Metrologic warrants and represents that all MS7120 scanners are free of all defects in material, workmanship and design, and have been produced and labeled in compliance with all applicable U.S.
  • Page 45: Notices

    OTICES Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 46 The following notice applies to Model number MS7120-11 only. For Class B compliance with FCC Part 15, ICES-003, and EN55022, attach the provided ferrite choke to the PowerLink cable shipped with your MS7120-11 bar code scanner. Ferrite Choke Installation: 1.
  • Page 47 Klappen Sie die beiden Hälften des Ferritkern Ver-schlusses zusammen. Le seguenti informazioni sono valide solo per il modello MS7120-11 Per essere conformi alla Classe B delle norme FCC Parte 15, ICES-003, e EN55022, occorre attaccare, al cavo dati/alimentazione inviato con l’MS7120- 11, il nucleo di Ferrite allegato.
  • Page 48 OTICES Nota (exclusivamente para los modelos de la serie MS7120-11) De acuerdo con las normativas FCC apartado 15, ICES-003 y EN55022 para la Clase B, el obturador de ferrita del PowerLink que se suministra con el modelo de lector de códigos de barras MS7120-11.
  • Page 49: Patents

    ATENTS “Patent Information This METROLOGIC product may be covered by one or more of the following U.S. Patents: U.S. Patent No.; 4,960,985; 5,081,342; 5,216,232; 5,260,553; 5,340,971; 5,424,525; 5,484,992; 5,525,789; 5,528,024; 5,557,093; 5,616,908; 5,627,359; 5,637,852; 5,661,292; 5,777,315; 5,789,730; 5,789,731; 5,811,780; 5,828,048; 5,844,227; 5,925,870; 6,029,894; 6,098,885; 6,209,789; 6,257,492;...
  • Page 50: Index

    NDEX accessories......2, 3 failure indicator ......9 adapter....... 2, 3, 5, 38 failure modes ..... 9, 11 application......27 function ..22, 35, 36, 37, 38 audible ........9 authorized service center..11 autodiscriminates....29 green LED ......10 ground .......
  • Page 51 NDEX normal depth of field ....35 scan lines....... 29 notices ....40, 41, 42, 43 scan pattern....... 8, 29 scan speed ......29 scanner installation..4, 5, 6 SELV ....... 4, 5, 6 OCIA ....1-4, 28, 29, 31-36 shock ........30 omnidirectional....
  • Page 53 October 2002 Printed in USA 0 0 - 0 2 4 0 8 B...