Telepen Output; Telepen Message Length; Upc-A - Honeywell HH490 User Manual

Telepen Output

Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2).

Telepen Message Length

Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-60. Minimum Default = 1, Maximum Default = 60.

UPC-A

100
Default AIM Telepen Output.
=
* AIM Telepen Output
(page 82) for additional information. Minimum and
Minimum Message Length
<Default All UPC-A Settings>
Original Telepen Output
Message
Maximum Message Length
HH490 User Guide