Initialization Of Levelmeter 2000 - ABB Levelmeter 2000 Instructions Manual

2.5. Initialization of Levelmeter 2000

Overview
Whenever Levelmeter 2000 is used for calibrating the robot, the equipment must first be
initialized as detailed in this section.
Shown below is an outline of how to initialize the Levelmeter 2000. Detailed procedures are
given further down.
Illustration, Levelmeter 2000
The Levelmeter 2000 is shown for reference below:
xx0200000083
A
B
C
3HAC 022907-001 Revision: -
1. Select the correct filter type, as detailed in
2. Set the measuring unit, as detailed in
3. Install sensor, as detailed in
4. Calibrate the robot, as detailed in the instruction for each axis respectively, in the
section Calibration on page 37!
Measuring unit
Selection pointer
Sensor connection
2 Reference information
2.5. Initialization of Levelmeter 2000
Illustration, Levelmeter 2000
Measuring units
Installation of sensor on page 22.
on page 21.
on page 22.
21