Preparing For Setup; Verify Customer Order; Physical Inspection; Emi Protection - GE LOGIQ V3 Basic Service Manual

3-4-1 Verify customer order

3-4-2 Physical inspection

3-4-3 EMI protection

LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8

3-4 Preparing for setup

Compare items received by the customer to that which is listed
on the delivery order. Report any items that are missing, back
ordered, or damaged.
Verify that the system arrived intact (visual inspection).
If the system has been damaged, please refer to
transportation' on page i-12
The LOGIQ V3/V5/V5 Expert has been designed to minimize
the effects of Electro-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the
system from image artifacts caused by this interference. For this
reason, it is imperative that all covers and hardware are installed
and secured before the unit is put into operation.
See 2-2-4 'EMI limitations' on page 2-9
about EMI protection.

Preparing for setup

in the beginning of this manual.
for more information
'Damage in
3-13