Networking Setup Requirements - GE LOGIQ V3 Basic Service Manual

Site Preparations

2-3-7 Networking setup requirements

2-3-7-1 Stand alone Ultrasound system (without network connection)
2-3-7-2 Scanner connected to hospital's network
2-3-7-3 InSite requirements
2-3-7-4 Purpose of the DICOM network function
2-18
None.
Supported networks:
100/1000 Mbit Ethernet/DICOM network (option)
InSite requires an Ethernet connection via:
• 100/1000 Mbit Interface
DICOM services provide the operator with clinically useful
features for moving images and patient information over a
hospital network.
Examples of DICOM services include the transfer of images to
workstations for viewing or transferring images to remote
printers.
As an added benefit, transferring images in this manner frees up
the on-board monitor and peripherals, enabling viewing to be
done while scanning continues.
With DICOM, images can be archived, stored, and retrieved
faster, easier, and at a lower cost.
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8