Electrical Safety - GE LOGIQ V3 Basic Service Manual

Hide thumbs Also See for LOGIQ V3:
Table of Contents

Advertisement

Introduction

1-6-5 Electrical safety

1-6-5-1 Safe practices
WARNING
WARNING
1-22
Follow these guidelines to minimize shock hazards whenever
you are using the Ultrasound system:
To minimize shock hazard, the equipment chassis must be
connected to an electrical ground.
The Ultrasound system is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with safety ground.
The power outlet used for this equipment should not be
shared with other types of equipment.
Both the system power cable and the power connector must
meet international electrical standards.
Connecting a LOGIQ V3/V5/V5 Expert to the wrong voltage
level will most likely destroy it.
DO NOT SERVICE OR DISASSEMBLE PARTS UNDER FRU
UNIT LEVEL AT ANY CIRCUMSTANCES.
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Logiq v5Logiq v5 expertH48612aaH48612abH48612ac

Table of Contents