General Procedures and Functional Checks
4-1-1 Purpose of this chapter
4-1-2 Contents in this chapter
4-1-3 Special Equipment required
4-2
This chapter provides procedures for quickly checking major
functions of the scanner and diagnostics instructions using the
built-in service software.
•
4-1 'Overview' on page 4-2
•
4-2 'General procedures' on page 4-3
•
4-3 'Functional checks' on page 4-21
To perform these tests, you'll need any of the sector, linear, or
convex probes. (Normally you should check all the probes used
on the system).
LOGIQ V3/V5/V5 Expert – Basic Service Manual
4-1 Overview
5726264-100 English Rev.8