GE LOGIQ V3 Basic Service Manual page 248

Replacement Procedures
8-3-8-2 Reload the Correct Preset Region
NOTE:
8-26
After the system software loading completion, please reload the
correct preset region.
1. Reboot the system.
2. Press Utility on the Control Pane, then select System ->
General.
3. In the Location portion, select the right region in the field of
Preset Region.
Figure 8-23. Preset Region
4. Reboot the system.
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8