4-2-3 Power off(continued)
NOTE:
4-2-3-1 System shutdown
CAUTION
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
To enable the key-combination <Ctrl+Alt+Delete>, the
dongle should be connected to the system.
•
Cancel
Use this button to exit from the System-Exit menu and
return to the previous operation.
Disconnect the Mains Power Cable is necessary. For example:
Relocating the scanner.
DO NOT unplug and/or transport the unit until after the power
off sequence has been completed. Failure to do so may result
in corrupted patient files.
General procedures
4-9