Preparing For Setup; Verify Customer Order; Physical Inspection; Emi Protection - GE LOGIQ S8 Service Manual

GE H
EALTHCARE
D 5394227, 12
IRECTION
Section 3-5

Preparing for setup

3-5-1

Verify Customer Order

Compare all items listed on the packing slip (delivery note) with those received.
Report any items that are missing, back ordered, or damaged.
3-5-2

Physical inspection

Verify that the system arrived intact (visual inspection).
If the system has been damaged, please refer to
beginning of this manual.
3-5-3

EMI Protection

This unit has been designed to minimize the effects of Electo-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the system from image artifacts caused by
this interference. For this reason, it is imperative that all covers and hardware are installed and secured
before the unit is put into operation.
Refer to
PROPRIETARY TO GE
The envelope with delivery address, packing list and invoice is located on the
front panel of the crate.
Check whether delivery is complete (according to packing list) and check visual
damage!
Figure 3-5 envelope at front panel of the crate
Section 2-2-3 "EMI Limitations" on page
Section 3-5 - Preparing for setup
LOGIQ S8/LOGIQ E8 S
3-3-2-3 "Damage in transportation" on page 3-6
2-4.
M
ERVICE ANUAL
in the
3 - 11