Completing The Setup; Purpose Of This Section; Contents In This Section; System Specifications - GE LOGIQ V3 Basic Service Manual

System Setup

3-5-1 Purpose of this section

3-5-2 Contents in this section

3-5-3 System specifications

3-5-3-1 System requirements verification
3-14

3-5 Completing the setup

This section describes how to complete the installation of
LOGIQ V3/V5/V5 Expert.
• 3-5-3 'System specifications' on page 3-14
• 3-5-4 'Electrical specifications' on page 3-16
• 3-5-7 'Connections on the I/O Rear Panel' on page 3-20
• 3-5-8 'Connecting probes' on page 3-20
• 3-5-9 'Powering the system' on page 3-20
• Verify that the site meets the requirements listed in
Chapter 2.
(See: 2-3 'Facility needs' on page
• Verify that the specifications below don't conflict with any
on-site conditions.
LOGIQ V3/V5/V5 Expert – Basic Service Manual
2-12.)
5726264-100 English Rev.8