Loading The Software; Purpose Of This Section; Customer Provided Prerequisite; Data Management - Moving All Images - GE LOGIQ V3 Basic Service Manual

8-3-1 Purpose of this section

8-3-2 Customer provided prerequisite

8-3-3 Data Management - moving all images

CAUTION
LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8

8-3 Loading the software

This section describes how to reinstall software on LOGIQ V3/
V5/V5 Expert.
• Formatted and labelled media for Images storage.
• Formatted and labelled media for Patient Archive and
Presets (User Defined Settings).
• Password for the user ADM.
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ V3/V5/V5 Expert before doing
backup of the Patient Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
• Move the images to a remote server or to removable media.
For instructions, please see "Disk management" in the Basic
User Manual/User Guide.
Loading the software
8-5