Maintenance Task Schedule; How Often Should Maintenance Tasks Be Performed - GE LOGIQ V3 Basic Service Manual

Care and Maintenance

10-4 Maintenance task schedule

10-4-1 How often should maintenance tasks be performed?

NOTE:
NOTE:
Service at Indicated
Time
Clean Probes
Inspect AC Mains Cable
Inspect Cables and
Connectors
Clean Console
10-6
The Care and Maintenance task schedule (provided in
Table 10-1 on page
V5/V5 Expert should be serviced and outlines items requiring
special attention.
It is the customer's responsibility to ensure the LOGIQ V3/V5/V5
Expert care and maintenance is performed as scheduled in
order to retain its high level of safety, dependability and
performance.
Your GE Service Representative has an in-depth knowledge of
your LOGIQ V3/V5/V5 Expert and can best provide competent,
efficient service. Contact GE for coverage information and/or
price for service.
The service procedures and recommended intervals shown in
the Care and Maintenance Task Schedule assumes that you
use your LOGIQ V3/V5/V5 Expert for an average patient load
(10-12 per day) and not use it as a primary mobile Ultrasound
system which is transported between diagnostic facilities.
If conditions exist which exceed typical usage and patient load,
then it is recommended to increase the periodic maintenance
frequencies.
Table 10-1: Customer Care Schedule
Daily Weekly
•*
LOGIQ V3/V5/V5 Expert – Basic Service Manual
10-6) specifies how often your LOGIQ V3/
Per
Facilities
QA
Monthly Program
•
•
•
5726264-100 English Rev.8
Notes
* or before each use
Mobile Ultrasound
system: Check
Weekly