5 About this product
5.1 Specifications, lift transverse unit (HQ)
Fig. 1:
Specifications, lift transverse unit
5.1.1
Using of lift transverse unit
• Installation in BS ... belt sections or ST ... sections.
• Offset of height difference between main and transverse section to the transverse
conveyor of workpiece pallets when
– Outfeeding from the main section
– Infeeding to the main section
5.1.2
Version of lift transverse unit
• Extremely compact construction. Suitable for tight spaces.
• Pneumatic drive (lifting)/electric drive (transverse conveyor).
• Maximum load: see Technical data on Page 75.
• Conveyor medium
HQ 2/G-H: Duplex chain (roller chain)
HQ 2/C-H: Flat top chain
• For HQ 2/G-H (with BS 2/G-H): Only WT 2 with PE wear pads can be transported
• Suitable for reversible operation
• HQ 2/G-H and HQ 2/C-H: The accumulation operation is to be avoided,
turn off the HQ 2/G-H and HQ 2/C-H as soon as the end position is reached.
• Cable/plug or terminal box motor connection
3 842 564 989/2022-06, MIT: HQ 2/G-H, BS 2/G-250, Bosch Rexroth AG
About this product
13/84
564 988-01