Repairing The Rain And Light Detector Sensor G397 , Valeo Manufacturer - Skoda Octavia III 2013 Workshop Manual

3.5 Repairing the rain and light detector
sensor - G397- , Valeo manufacturer
Note
There are various bushings for the Rain and light detector
♦
sensor - G397- from different manufacturers.
Sensor bushing with optical unit is also supplied with retaining
♦
clips as a spare part. These must be removed for vehicles that
do not require retaining clips.
Work procedure
– Remove the sensor
⇒ "3.4 Removing and installing Sensor for rain and light de‐
tection G397 ", page 71
– Carefully remove the silicone cushion -2- or the residues from
the sensor -1-.
Caution
The surface of the sensor must be completely free of foil resi‐
dues.
– Clean the sensor surface with cleaning solution.
– Remove the silicone paper -3- from the cushion -2-.
• Transparent protective foil -1- stays on the cushion -2- to begin
with as assembly film.
– Attach the cushion -2- with the protective foil -1- to the sensor
-3-.
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
3. Windscreen wiper and washer system
73