Calibrate Automatic Distance Control - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Unlock quick-release fittings -2- by rotating it -arrow-.
– Remove quick-release fittings -2- from the pin bolts -1-.
– Remove retaining plate -3- from the control unit -4-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Replace quick-release fittings -2-.
– Press pin bolts -1- until they lock into the quick-release fittings.

– Calibrate automatic distance control

⇒ "7.5 Calibrate automatic distance control", page 23 .
7.5 Calibrate automatic distance control
Work procedure to calibrate automatic distance control ⇒ Chas‐
sis; Rep. gr. 44 .
23
7. Automatic distance control (adapted CC) and Front Assist