Removing And Installing The Roof Aerial - Skoda Octavia III 2013 Workshop Manual

2.1.2 Octavia Combi
1 - Induction plate
❑ Forms the GSM signal
induction field
❑ Removing and installing
⇒ "3.4 Removing and in‐
stalling induction plate",
page 45
2 - Signal amplifier for mobile
phones
❑ Removing and installing
⇒ "3.3 Removing and in‐
stalling the aerial signal
reception amplifier
(compensor)",
page 44
3 - Infotainment display unit
4 - Infotainment control unit
5 - Rear right side window aer‐
ial
❑ Removing and installing
⇒ Body Work; Rep. gr.
64
6 - Aerial module (amplifier)
❑ AM/FM reception
❑ Removing and installing
⇒ "2.5 Removing and in‐
stalling AM/FM, FM2/
DAB aerial module (am‐
plifier)", page 41
7 - Aerial module (amplifier)
❑ FM2/DAB reception
❑ Removing and installing
⇒ "2.5 Removing and in‐
stalling AM/FM, FM2/
DAB aerial module (amplifier)", page 41
8 - Rear left side window aerial
❑ Removing and installing ⇒ Body Work; Rep. gr. 64
9 - Auxiliary heating radio controlled receiver - R64-
❑ removing and installing ⇒ Heating, Air Conditioning; Rep. gr. 82
10 - Roof aerial
❑ Removing and installing
2.2

Removing and installing the roof aerial

Removing
For vehicles without panoramic roof:
– Undo the top B pillar trim and top C and D pillar trim (combi)
⇒ Body Work; Rep. gr. 70 .
– Loosen headlining ⇒ Body Work; Rep. gr. 70 and carefully
hang the rear part downward.
⇒ "2.2 Removing and installing the roof aerial", page 39
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
39
2. Aerial systems