Removing And Installing Sensor For Rain And Light Detection G397 - Skoda Octavia III 2013 Workshop Manual

3.4 Removing and installing Sensor for rain
and light detection - G397-
Caution
If the sensor for rain and light detection - G397- is removed
from the retaining plate on the windscreen (e.g. when changing
the windscreen), it can be subsequently installed again. Store
the removed sensor dust-free until it is installed again and
make sure that the silicone coupling cushion does not get dirty.
Removing
Note
To facilitate removal, turn the mirror as necessary.
– Switch off the ignition and all electrical components.
– Remove covers from the Sensor for rain and light detection -
G397- ⇒ Body Work; Rep. gr. 68 .
– Release retaining clip -1- -arrow-.
Note
Observe a waiting time of at least 1 minute after releasing the
retaining clip. This allows the silicone layer to expand so that it
will not be damaged while it is being removed.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
3. Windscreen wiper and washer system
71