Assembly Overview - Bi-Xenon Headlights; Owner's Manual Octavia; Self-Study Programme No. 97 ; Škoda Octavia Iii Vehicle Pre; Current Flow Diagrams, Electrical Fault Finding And Fitting Loca- Tions - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
♦ Signals of vehicle level sensors on front and rear axle
♦ individual wheel speeds
♦ Position of the light switch
On the basis of this information, it controls the rotary and inclina‐
tion movement of the headlights.
• ⇒ "2.12 Removing and installing the cornering light and head‐
light range control unit J745 ", page 95
• Removing and installing
⇒ "2.13 Vehicle level sensor G78 front left or G76 rear left ",
page 97 .
Further information, description of function and types of head‐
lights to be fitted:
⇒ Owner's manual Octavia III
⇒ Self-study programme No. 97 ; Škoda Octavia III Vehicle pre‐
sentation
⇒ Current flow diagrams, Electrical fault finding and Fitting loca‐
tions
2.2

Assembly overview - Bi-xenon headlights

1 - Control unit for gas dis‐
charge lamp - J343- left or -
J344- right
❑ Removing and installing
⇒ "2.9 Removing and in‐
stalling control unit for
gas discharge lamp
J343 left or J344 right",
page 94
2 - Headlight housing
❑ Removing and installing
is the same as for the
halogen headlight
⇒ "1.2 Removing and in‐
stalling headlight",
page 80
❑ adjust
⇒ "1.3 Adjusting head‐
lights", page 80
3 - Bulb for side light and day‐
time running light
❑ 12 V, 21/5 W (P21/5W)
❑ Renew
⇒ "2.5.2 Replacing
bulbs for side light and
daytime running light
P21/5W", page 92
4 - Cover
5 - Headlight range control mo‐
tor
❑ Removing and installing
⇒ "2.14 Removing and
installing headlight
range control motor",
page 97
88
Rep. gr.94 - Lights, bulbs, switches - exterior
.
.