Starter, Current Supply, Ccs; Contact Corrosion - Skoda Octavia III 2013 Workshop Manual

27 –

Starter, current supply, CCS

1

Contact corrosion

(SRL000764; Edition 12.2014)
The use of unsuitable connection elements (screws, nuts, wash‐
ers, ...) causes contact corrosion.
This is why only connection elements with a special surface coat‐
ings are fitted.
Therefore, the rubber or plastic parts and the adhesives are made
from electrically non-conductive materials.
In case of doubt regarding the re-use of certain parts, the use of
new parts is recommended.
WARNING
♦ It is recommended to use only original connection material
as well as spare parts which are tested and compatible
with aluminium, see ⇒ Electronic Catalogue of Original
Parts .
♦ It is recommended to use only Škoda accessories.
♦ Any damage resulting from contact corrosion is not cov‐
ered by the terms of the warranty.
Note
It is possible to use the contact surface cleaning set -
♦
VAS6410- for repair work on contact surfaces which show
traces of contact corrosion (oxidation).
Examples for application of the contact surface cleaning set -
♦
VAS6410- can be found in the Workshop Manual "Electrical
System – General notes" ⇒ Electrical System – General notes;
Rep. gr. 97 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
1
1. Contact corrosion