Infotainment Self-Diagnosis - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Compress plug catch -arrows-.
– Open catch clamp -arrow- and disconnect plug.
– Release and pull off other plug connections.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
Vehicles manufactured up to CW 13/2013:
Caution
After inserting the unit into the assembly opening it is essential
to once again secure the wiring loom to the fin on the heating
and air conditioning unit.
If the wiring loom is installed incorrectly, there is a risk that the
wiring loom will collide with the recirculating air flap for the
heating and air conditioning unit.
– Following installation, perform a visual inspection of recircu‐
lating air flap operation.
All vehicles:
When replacing the pairing and the coding of the Infotainment
control unit, see ⇒ "1.5 Electronic anti-theft coding", page 33
1.7

Infotainment self-diagnosis

Carry out "self-diagnosis" with the ⇒ Vehicle diagnostic tester in
the function "Targeted fault finding".
36
Rep. gr.91 - Communication
.