Skoda Fabia II 2007 Workshop Manual page 99

– Release screws -arrows-.
Caution
♦ Under no circumstances touch the circuit board -B- of the
gearshift mechanism with the fingers, because static dis‐
charge can destroy the electronic components and the
circuit board.
♦ The circuit board can only be replaced together with the
gearshift mechanism!
– Detach catch plate -A- from the gearshift mechanism.
Note
The catch plate is clipped to the left and to the right with retaining
lugs.
– Pull out the locking clasp -1- for the selector lever control on
the gearshift mechanism downwards.
– Pull the plastic securing spring -2- slightly forwards and only
push the pin -3- as far as necessary upwards -arrow-.
Note
Make sure that the pin is not fully pressed out.
– Pull selector lever control cable -4- out of the gearshift mech‐
anism.
For vehicles Fabia II and Roomster (up to production date
10.2011)
– Shift selector lever to position "Tiptronic".
– Remove the pre-exhaust pipe with mounting bracket -1- ⇒
Engine; Rep. gr. 26 .
– Remove underbody cover on right and left -arrows-.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
95