Skoda Fabia II 2007 Workshop Manual page 85

– Disconnect plug connection -A- from the shift mechanism to
the vehicle wiring harness.
Note
Ignore pos. -B-, -C- and -1-.
♦
As of production date 11.2009 the shift mechanism is
♦
changed, the 4-pin plug connection -B- and the selector lever
lock solenoid - N110- -1- are already located in the shift mech‐
anism
⇒ "2.1.2 Summary of components - Gearshift mechanism -
Octavia II as of 11.2009", page 44
– Raise vehicle.
– Remove underbody cover on right and left -arrows-.
– Detach tunnel bridge below the exhaust system ⇒ Engine;
Rep. gr. 26 .
– Disconnect plug connection -1-, remove inserting terminal out
of the bracket -2- and expose wiring to lambda probe heater
downstream of catalytic converter.
– Separate exhaust system at the clamping sleeve -1-.
– Remove the bracket for the pre-exhaust pipe from the assem‐
bly carrier arrows ⇒ Engine; Rep. gr. 26 .
– Unhook front and rear silencer ⇒ Engine; Rep. gr. 26 .
Note
The decoupling element of the front part of the exhaust system
should not be bent by more than 10° - risk of damage.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
.
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
81