Skoda Fabia II 2007 Workshop Manual page 56

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
4 - Shift mechanism
❑ with selector lever lock solenoid - N110-
❑ ⇒ "2.14 Emergency release of gearshift mechanism out of position P ", page 105
❑ ⇒ "2.9 Removing and installing selector mechanism", page 74
❑ ⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 55
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 52
5 - Screw
❑ 8 Nm
6 - Shift housing with gasket
❑ Remove the shift mechanism from the shift housing
7 - Nut
❑ 4 pieces
❑ 25 Nm
8 - Gearshift lever
9 - Cable support
❑ for selector lever control cable
10 - Screw
❑ for cable support to gearbox
❑ 2 pieces
❑ 23 Nm
11 - Selector lever control cable
❑ The selector lever control cable must not be separated from the shift mechanism Pos. 3, it must be
removed together as one component part ⇒ Electronic Catalogue of Original Parts.
❑ when installing in the vehicle, clamp on the gearbox side with the fixing part to the heat shield of the
exhaust system
❑ Do not grease selector lever control cable
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 52
❑ ⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 55
12 - Support
❑ for selector lever control cable
13 - Nut
❑ for holder Pos. 12 at gearbox
❑ 13 Nm
Remove the shift mechanism together with the selector lever con‐
trol cable from the shift housing
Remove the shift mechanism -A- together with the selector lever
control cable -C- from the shift housing -B- in
-direction of arrow-. To do so, unscrew 4 screws Pos. 5 (fig.
S37-10009) from the shift housing
52
Rep. gr.37 - Controls, housing
⇒ page 52
⇒ Item 5 (page 52) .