Skoda Fabia II 2007 Workshop Manual page 46

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
Ignition key anti-removal lock is not actuated mechanically with
the linkage but electrically with a magnet.
♦ Check the function of the ignition key anti-removal lock
⇒ "2.4 Check the function of the ignition key removal lock",
page 57 .
1 - Cover with handle
❑ ⇒ "2.5 Removing and In‐
stalling the cover for the
shift mechanism",
page 58
❑ ⇒ "2.6 Removing and in‐
stalling and installing
selector lever handle up
to 10.2012", page 65
❑ for the emergency re‐
lease only the cover
needs to be unclipped
⇒ "2.14 Emergency re‐
lease of gearshift mech‐
anism out of position P ",
page 105
2 - Stop buffer for selector lever
❑ clipped into the gearshift
mechanism
3 - Nut
❑ 4 pieces
❑ for attaching the gear‐
shift mechanism to body
❑ 10 Nm
4 - Shift mechanism
❑ ⇒ "2.9 Removing and in‐
stalling selector mecha‐
nism", page 74
❑ with firmly integrated cir‐
cuit board for gearshift
mechanism, do not
touch
❑ with firmly integrated
Tiptronic switch - F189-
and Selector lever lock
solenoid - N110- , these components can be checked in the "Targeted fault finding" ⇒ Vehicle diagnostic
tester
❑ replace gearshift mechansim if Tiptronic switch - F189- defective
⇒ "2.9 Removing and installing selector mechanism", page 74
❑ If the selector lever lock solenoid - N110- is faulty, the shift mechanism will need to be replaced
⇒ "2.9 Removing and installing selector mechanism", page 74
5 - Latch spring
6 - Screw
❑ 3.5 Nm
7 - Catch plate
8 - Screw
❑ 4 pieces
❑ for attaching the catch plate to the gearshift mechanism
❑ 3.5 Nm
42
Rep. gr.37 - Controls, housing