Skoda Fabia II 2007 Workshop Manual page 176

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Make a sketch by hand in the same way as for the illustration
with all the solenoid valves and their plug connections and
mark all the plugs with the corresponding colour. Also mark
the related cables with the corresponding colours.
Note
This sketch is absolutely necessary, so that the plugs on the
♦
solenoid valves are not inadvertently interchanged when re-
installing the slide valve body.
Under certain circumstances an interchange of the plugs could
♦
lead to a destruction of the gearbox.
– With a small screwdriver, lever up the catches on the connec‐
tors at the solenoid valves -Pos. 1...8- and pull out the con‐
nectors.
Note
In case of damage of the plug connections, the entire wiring har‐
ness with 14-pin plug or the slide valve body with the solenoid
valves must be replaced.
172
Rep. gr.38 - Gears, control