Skoda Fabia II 2007 Workshop Manual page 127

– Unscrew earth strap -3-.
– Detach electrical cables -1- and -2- at starter and expose.
– Mark hoses of ATF radiator to ATF radiator, in order to prevent
interchanging when installing.
Caution
♦ When the engine is warm, the cooling system is under
overpressure.
♦ Before removing the coolant hoses, cover the cap of the
coolant expansion tank with a cloth and open it carefully.
– Seal the hoses of the ATF radiator with hose clamps -
MP7-602 (3094)- .
– Remove hoses from the ATF radiator.
– Seal support of ATF radiator and coolant hoses with suitable
stops from the screw plug set for engine , e. g. -VAS 6122- .
– Release all connecting screws of the engine/gearbox acces‐
sible from the top.
Installation positions: ⇒ "3.3 Tightening torques ", page 134
– Mount the supporting device - T30099- with base as shown.
– Take up the weight of the engine/gearbox unit at the spindles.
– Remove gearbox console -A-, to this end release screws -1-
and -2-.
– Remove both front wheels.
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove the front wheelhouse liners ⇒ Body Work; Rep. gr.
66 .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
.
3. Removing and installing the gearbox
123